Comparación de modelos sísmicos para un edificio histórico en mampostería

Abstract

In this project, a historic masonry building in Sardinia, Italy has been considered as a case study for the comparison of two approaches for modeling, static and seismic analysis. Two software with different modeling approaches were employed with the purpose of comparing and discussing the results. SismiCad12 was used to simulate the structural behavior of the historic masonry building. SismiCad12 uses the Finite Element Method (FEM) that allows to model and analyze most types of 3D structures, and it is suitable for masonry structures. On the other hand, a different and innovative modeling approach called Frame Macro Elements (FME) was also applied using the 3Muri software, specially designed for assessing the linear, nonlinear, and seismic behavior of masonry structures. Assuming the same hypothesis to construct the 3D model of the structure in each code, the results of the static analysis show a different distribution of the vertical loads in the structure, which are more realistic in the FEM modeling. This different criterion of evaluation of the vertical loads carries a mechanism of "soft floor" in the pushover analysis in the FEM modeling, and therefore, a lower ultimate displacement corresponding to the collapse of the structure. On the other hand, in dynamic analyzes, FME modeling is more receptive to reality, involving a massive percentage of masses participating