The engine was tested with biodiesel blends for various loads and the speed is maintained constant at 1500 rpm to study the improvement of performance. Experimental result shows that brake thermal efficiency (BTE) increased upto14.7%, brake specific fuel consumption (BSFC) decreased up to 8.7%. The exhaust gas temperature 1310C (pure diesel) reduced to 1120C at zero break power, whereas exhaust gas temperature increased from 5480C to 5710C at maximum load due to faster burning of blended fuels. The mean effective pressure (MNEP) at different break power with an engine speed of 1500 rpm found as 74.9 bar for blends and 68.8 bar for pure diesel. Heat release rate found 162.1 KJ/m3K for D50 E40 blend and 121.2 KJ/m3K for pure diesel at maximum break power. Longer ignition delay and shorter combustion duration are found with all blends than pure Diesel fuel. The concentrations of NOx, CO, CO2, PM and HC gases reduced to 0.036% in exhaust emission for biodiesel blends. Also, the smoke density is drastically reduced to 36 [HSU-Hartridge smoke units] than that of Diesel fuel. The oxygen concentration, fuel distribution, latent heat of vaporization, combustion temperature, ignition delay and cetane number have improved performance, combustion and reduced exhaust gas emissions. This study has been used for the applications in automotive engines.
CITATION STYLE
Suyambazhahan, S. (2019). Experimental investigation of performance, emissions and combustion on 4 stroke single cylinder direct injection compression ignition (Dici) engine using diesel blends. International Journal of Recent Technology and Engineering, 8(1), 3442–3449.
Mendeley helps you to discover research relevant for your work.