Formation of Titanium Nitride, Titanium Carbide, and Silicon Carbide Surfaces by High Power Femtosecond Laser Treatment

Abstract

Coatings based on titanium nitrides, titanium carbides and silicon carbides can optimize the surface properties of titanium or silicon for various applications ranging from biocompatibility to chemical stability and durability. Here, we investigated a high power (100 W) high pulse repetition rate femtosecond laser process (λ=1030 nm, τ=750 fs, f=1 MHz) for the treatment of titanium and silicon in atmospheres of argon, nitrogen, methane, ethene and acetylene. In a nitrogen atmosphere, a homogeneous coating of TiON is formed on titanium. In an ethene/argon atmosphere coatings of TiOC and SiC are formed on Ti and Si, respectively. The process allows a fast surface transformation with a process rate of 0.33 cm2 s−1 and a high spatial resolution below 0.5 mm with a minimal heat affected zone at the same time. In contrast to low repetition rate femtosecond laser processed samples, the surfaces are more robust against mechanical impact. At the same time, the surfaces reveal a distinct microstructure in comparison to coatings obtained by vapor deposition techniques.