Influence of Fly Ash Geopolymer Ceramic Powder Addition on Sn-3.0Ag-0.5Cu Solder Joints

Abstract

This paper reports the effect of 1.0 wt.% fly ash (FA) geopolymer ceramic powder addition in Sn-3.0Ag-0.5Cu (SAC305, in wt.%) solder joint. Powder metallurgy route was used to fabricate the new composite solder. Solder balls were formed from the new composite solder and reflowed on Cu substrate. The effect of FA as ceramic reinforcement on the bulk microstructure and the interfacial intermetallic compound layer formation of solder joints were investigated under optical microscope. Microstructure observation showed that the β-Sn dendrite size was refined in SAC305-1.0FA/Cu bulk solder joint sample than that in the non-reinforced sample. The addition of FA geopolymer ceramic powder into the solder matrix also produced a thinner intermetallic compound layer.