Plasma-induced Polymerization and Grafting of Acrylic Acid on the Polypropylene Nonwoven Fabric Using Pulsed Underwater Diaphragm Electrical Discharge

Abstract

Polypropylene (PP) nonwovens are used in many hygiene, healthcare and medical products due to their low cost, high chemical resistance and inertness. From an economic point of view, PP textiles would be used as an excellent support material in regenerative medicine or tissue engineering, but here surface functionalization is necessary to ensure cell adhesion and proliferation. Acrylic acid (AAc) is an excellent source of carboxylic-rich (-COOH) coatings suitable for this purpose, but their multistep preparation is time-consuming. Plasma polymerization provides an excellent solution to this demanding procedure since the process of polymerization and grafting to the substrate takes place simultaneously. Here, we propose a relatively fast and effective method for AAc plasma polymerization by using a pulsed underwater diaphragm electrical discharge operated in an aqueous solution consisting of AAc. AAc layers are successfully grafted onto PP nonwovens, which are continuously rewound through the slit where the plasma is generated. The presence of plasma polymerized AAc layer in the fibrous structure of PP nonwoven was monitored by SEM, FTIR and XPS measurements. Additionally, the improved wettability and adhesion characteristics were investigated by the critical wetting surface tension (CWST) method, the standard method of strike-through time (STT) and „tape-peel“ test. Resulting AAc modified PP nonwoven possesses hydrophilic character, enhanced adhesion and a considerable amount of -COOH groups on the surface. Although after the washing test the FTIR and XPS results indicated a lower concentration of the carboxylic groups, the CWST and STT measurements confirmed the stable hydrophilic character of the PP nonwovens surface.