Large dynamic range pressure sensor based on two semicircle-holes microstructured fiber

44Citations
Citations of this article
42Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

This paper presents a sensitive and large dynamic range pressure sensor based on a novel birefringence microstructured optical fiber (MOF) deployed in a Sagnac interferometer configuration. The MOF has two large semicircle holes in the cladding and a rectangular strut with germanium-doped core in the center. The fiber structure permits surrounding pressure to induce large effective index difference between the two polarized modes. The calculated and measured group birefringence of the fiber are 1.49 × 10-4, 1.23 × 10-4, respectively, at the wavelength of 1550 nm. Experimental results shown that the pressure sensitivity of the sensor varied from 45,000 pm/MPa to 50,000 pm/MPa, and minimum detectable pressure of 80 Pa and dynamic range of better than 116 dB could be achieved with the novel fiber sensor. The proposed sensor could be used in harsh environment and is an ideal candidate for downhole applications where high pressure measurement at elevated temperature up to 250 °C is needed.

Cite

CITATION STYLE

APA

Liu, Z., Htein, L., Lee, K. K., Lau, K. T., & Tam, H. Y. (2018). Large dynamic range pressure sensor based on two semicircle-holes microstructured fiber. Scientific Reports, 8(1). https://doi.org/10.1038/s41598-017-18245-6

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free