Leaky helical flexural wave backscattering contributions from tilted cylindrical shells in water: Observations and modeling

Abstract

For tilt angles smaller than the meridional ray coupling condition previously investigated [S. F. Morse et al., J. Acoust. Soc. Am. 103, 785–794 (1998)], flexural helical waves on cylindrical shells can significantly enhance the backscattering. These contributions are compared and modeled here for an empty cylinder. Experiments using tone bursts were performed on a tilted stainless steel shell to investigate the contributions caused by flexural leaky Lamb waves above the coincidence frequency of the shell. In some of the measurements the tone bursts were of sufficient duration to superpose helical wave contributions of successive circumnavigations, along with the meridional contribution near the critical tilt, to arrive at a quasi-steady-state backscattering amplitude for the cylinder. These measurements are compared with an approximate numerical partial-wave series solution and a ray theory as a function of the tilt angle. The data for ka=20 follow the basic shape of the ray theory and the relevant features of the partial-wave model. They illustrate the importance of the interference of successive helical wave contributions. Measurements (also as a function of the tilt angle) using tone bursts that were sufficiently short to separate the earliest helical wave contribution from later contributions also support the ray theory.