Preparation of Cu2O-reduced graphene nanocomposite modified electrodes towards ultrasensitive dopamine detection

126Citations
Citations of this article
64Readers
Mendeley users who have this article in their library.

Abstract

Cu2O-reduced graphene oxide nanocomposite (Cu2O-RGO) was used to modify glassy carbon electrodes (GCE), and applied for the determination of dopamine (DA). The microstructure of Cu2O-RGO nanocomposite material was characterized by scanning electron microscope. Then the electrochemical reduction condition for preparing Cu2O-RGO/GCE and experimental conditions for determining DA were further optimized. The electrochemical behaviors of DA on the bare electrode, RGO- and Cu2O-RGO-modified electrodes were also investigated using cyclic voltammetry in phosphate-buffered saline solution (PBS, pH 3.5). The results show that the oxidation peaks of ascorbic acid (AA), dopamine (DA), and uric acid (UA) could be well separated and the peak-to-peak separations are 204 mV (AA-DA) and 144 mV (DA-UA), respectively. Moreover, the linear response ranges for the determination of 1 × 10-8 mol/L~1 × 10-6 mol/L and 1 × 10-6 mol/L~8 × 10-5 mol/L with the detection limit 6.0 × 10-9 mol/L (S/N = 3). The proposed Cu2O-RGO/GCE was further applied to the determination of DA in dopamine hydrochloride injections with satisfactory results.

Cite

CITATION STYLE

APA

He, Q., Liu, J., Liu, X., Li, G., Deng, P., & Liang, J. (2018). Preparation of Cu2O-reduced graphene nanocomposite modified electrodes towards ultrasensitive dopamine detection. Sensors (Switzerland), 18(1). https://doi.org/10.3390/s18010199

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free