Phenomenology of graphite burning in air ingress accidents of HTRs

Abstract

Air ingress with graphite burning belongs to the accident scenarios in HTRs with potentially severe consequences. This paper gives an overview of basic phenomena of graphite burning like ignition conditions and moving reaction fronts. The pioneering graphite burning experiments of Don Schweitzer are successfully reevaluated. Ignition conditions are examined, and it is underlined that burning depends not only on graphite properties but also on the heat balance in the whole graphite arrangement. In graphite-moderated reactors, ignition occurs at about 650°C for small air flow rates: this means that normal operation temperatures in HTRs always allow for ignition. Fuel behaviour in air ingress, as determined in the KORA facility, is discussed: up to about 1300°C modern TRISO fuel is stable in air, but from 1500°C a complete, fast destruction is observed. Exemplary calculations on massive air ingress by chimney draught performed with REACT/THERMIX are outlined. For a hot bottom reflector there is a substantial time span before fuel is attacked. Because severe air ingress in well-designed HTRs belongs to beyond design basis accidents, the knowledge is fairly good. Concerning protecting measures, a more detailed examination of thick SiC layers is proposed. Copyright © 2011 Rainer Moormann.