Experimental Investigation of Recycled Fine Aggregate from Demolition Waste in Concrete

Abstract

In this study, locally produced recycled fine aggregate from concrete demolition waste was investigated for potential replacement of sand in new concrete mixes. Tests for the waste material included visual examination, chemical composition, grain size distribution, specific gravity, and fineness modulus. Tests on the incorporated recycled fine aggregate in new concrete mixes involved tests of the hardened plain concrete product. In total, eight concrete mixes were considered, of which four had low cement content with 30 MPa target strength, and the other four had high cement content with 55 MPa target strength. For each cement content, the four concrete mixes incorporated fine aggregate replacement ratios of 0% (control), 25%, 50%, and 100%. The hardened concrete tests involved cubes, cylinders, and prisms. The tests addressed compressive strength, tensile strength, and modulus of rupture in accordance with the relevant ASTM standards. In all cases, the average of two tested samples at the age of 28 days was considered. Results of the study showed that the recycled fine aggregate has some cementitious properties, which is capable of hardening when mixed with water and left to dry, even without adding cement from exterior sources. All tested concrete specimens made with recycled fine aggregate exhibited compressive and tensile strengths at least equal to 75% that of the control specimens that contained natural fine aggregate. However, for concrete mixes utilizing low cement content that can yield a compressive strength around 30 MPa with natural aggregate, replacement of 25% or 100% of the natural fine aggregate by weight with locally produced recycled fine aggregate from crushed old concrete can match and often exceeds the compressive and tensile strength of concrete made with virgin aggregate.