The publisher regrets that during the final stages of publication some errors were introduced that were not at the fault of the authors. The errors in the published article are on page 113, paragraph 2 and page 114, paragraph 2, where the units MPa√m1/2 should be written as MPa√m. The correct sentences are as follows: Page 113: The peak value of K is 20.7 MPa√m and was observed at 5 mm beyond the EB weld centre line. Page 114: Using the maximum stress intensity factor determined from slitting (K = 20.7 MPa√m) and the yield strength of the parent material as 260 MPa, the error was determined as 2%. The publisher would like to apologise for any inconvenience caused.
Kapadia, P., Davies, C., Pirling, T., Hofmann, M., Wimpory, R., Hosseinzadeh, F., … Nikbin, K. (2017, May 15). Erratum to “Quantification of residual stresses in electron beam welded fracture mechanics specimens” (International Journal of Solids and Structures (2017) 106(107) (106–118) (S0020768316303614) (10.1016/j.ijsolstr.2016.11.028)). International Journal of Solids and Structures. Elsevier Ltd. https://doi.org/10.1016/j.ijsolstr.2017.03.017