The Novel CPW 2.4 GHz Antenna with Parallel Hybrid Electromagnetic Solar for IoT Energy Harvesting and Wireless Sensors

Abstract

The design and implementation's novelty simultaneously utilizes the antenna's frequency, polarization, and feed structure to maximize the harvested RF energy and become a microstrip communication circuit for wireless sensor or communication systems in IoT devices. In addition, the optimization of the parallel circuit configuration has a voltage doubler model with an integrated parallel system and thin-film solar cells. Implementation of the antenna structure has two-line feeds in one antenna. Usage both feeds have the same function as CPW circular polarization. Another advantage is that there is no miss-configuration when installing the port exchanges when using both output ports simultaneously. The 2-port antenna has an area of 1/2 per port (where accessible wavelengths work well at the 2.4 GHz frequency). It has been shown to achieve a relatively narrow bandwidth of 86.5 percent covering WiFi frequency band networks and IoT communications. It does notrequire additional filters and analog matching circuits that cause power loss in the transmission process in parallel voltage doubler circuits. Integrating a reflector on the CPW antenna with two ports for placement of thin-film solar cells provides antenna gain of up to 8.2 dB. It provides a wide beam range with directional radiation. Using a multi-stage parallel to increase voltage output and integrated with a thin-film solar cell converter provesefficient in the 2.4 GHz frequency band. When the transmission power density is -16.15 dBm with a tolerance of 0.023, the novel energy harvester configuration circuit can produce an output voltage of 54 mV dc without adding solar cell energy. And Integrated thin-film solar cell a light beam of 300 lux in the radiation beam area of -16.15 dBm, the energy obtained has a value of 1,74467V. It also shows that the implementation of this configuration can produce an optimal dc output voltage in the actual indoor and outdoor ambient settings. The optimization of antenna implementation and the communication process with Multiple signal classifications improves the configuration of antennas that are close to each other and have identical phase outputs. It is instrumental and efficient when applied to IoT devices