We carried out a residual stress distribution analysis in a APS TBC throughout the depth of the coatings. The samples were heat treated at 1150 °C for 190 h and the data analysis used image based modelling based on the real 3D images measured by Computed Tomography (CT). The stress distribution in several 2D slices from the 3D model is included in this paper as well as the stress distribution along several paths shown on the slices. Our analysis can explain the occurrence of the “jump” features near the interface between the top coat and the bond coat. These features in the residual stress distribution trend were measured (as a function of depth) by high-energy synchrotron XRD (as shown in our related research article entitled ‘Understanding the Residual Stress Distribution through the Thickness of Atmosphere Plasma Sprayed (APS) Thermal Barrier Coatings (TBCs) by high energy Synchrotron XRD; Digital Image Correlation (DIC) and Image Based Modelling’) (Li et al., 2017) .
Li, C., Zhang, X., Chen, Y., Carr, J., Jacques, S., Behnsen, J., … Cernik, R. (2017). Residual stress distribution analysis of heat treated APS TBC using image based modelling. Data in Brief, 13, 557–561. https://doi.org/10.1016/j.dib.2017.06.016