In this paper we have developed a passivation technique with silicon-nitride (SiN X ) film that requires no surface pre-treatment, and is fully compatible to monolithic microwave integrated circuits (MMICs). The nitride depositions were carried out by ECR-CVD (electron cyclotron resonance-chemical vapor deposition) directly over InGaP/GaAs heterojunction structures, which are used for heterojunction bipolar transistors (HBTs). Optical emission spectrometry (OES) was used for plasma characterization, and low formation of H and NH molecules in the gas phase was detected at pressure of 2.5 mTorr. These molecules can degrade III-V semiconductor surfaces due to the preferential loss of As or P and hydrogen incorporation at the substrate. The substrates were cleaned with organic solvents using a Sox-let distillate. The ECR depositions were carried out at a fixed substrate temperature of 20 °C, SiH 4 /N 2 flow ratio of 1, Ar flow of 5 sccm pressure of 2.5 mTorr and microwave (2.45 GHz) power of 250 W and RF (13.56 MHz) power of 4 W. We have applied this film for InGaP/GaAs HBT fabrication process with excellent results, where two major contribuiton is related to this passivation technique, the enhancement in the transistor dc gain β and the improvement in the signal-to-noise ratio when compared unpassivated and passivated devices. © 2008.
CITATION STYLE
Manera, L. T., Zoccal, L. B., Diniz, J. A., Tatsch, P. J., & Doi, I. (2008). Surface passivation of InGaP/GaAs HBT using silicon-nitride film deposited by ECR-CVD plasma. Applied Surface Science, 254(19), 6063–6066. https://doi.org/10.1016/j.apsusc.2008.02.187
Mendeley helps you to discover research relevant for your work.