Determination of ultrasonic wave velocities and phase velocity dispersion curves of an Inconel 600 plate using resonant ultrasound spectroscopy and leaky Lamb waves.

  • Kim Y
  • Song S
  • Kwon S
 et al. 
  • 3


    Mendeley users who have this article in their library.
  • N/A


    Citations of this article.


A plate of Inconel 600 was interrogated using the resonant ultrasound spectroscopy (RUS) and the reflected leaky Lamb waves (LLW). It was found that the plate used in the present work has anisotropy in its material properties by the RUS. The longitudinal and the transverse wave velocities of the Inconel 600 plate were determined by the RUS, ultrasonic pulse-echo method and cut-off frequencies of the LLWs. The wave velocities in the direction of thickness determined by the RUS under the assumption of the orthotropic symmetry were quite similar to those obtained by other methods, the pulse-echo method and from cut-off frequencies. The reflected LLW from the plate was measured with varying the incident angle. The dispersion curves obtained from the reflected LLWs show good agreement with the theoretical calculation in general. The mismatches may be caused by anisotropy of the plate.

Author-supplied keywords

  • Cut-off frequency
  • Inconel 600
  • Leaky Lamb wave
  • Phase velocity dispersion curves
  • Resonant ultrasound spectroscopy
  • Ultrasonic wave velocity

Get free article suggestions today

Mendeley saves you time finding and organizing research

Sign up here
Already have an account ?Sign in

Find this document


  • Young H Kim

  • Sung-Jin Song

  • Sung-Duk Kwon

  • Yong-Moo Cheong

  • Hyun-Kyu Jung

Cite this document

Choose a citation style from the tabs below

Save time finding and organizing research with Mendeley

Sign up for free