Single-phase inverters and rectifiers require the use of an energy buffer to absorb twice-line-frequency power ripple. Historically, this challenge has been addressed by the use of large electrolytic capacitors. Lifetime constraints and the need for improved system performance have motivated designers to seek other capacitor technologies, such as ceramic and film, which are frequently used in conjunction with active filtering converters to reduce the capacitance required. Active filtering converters cycle the capacitor voltage over a wide voltage range while maintaining a constant dc bus voltage. This large-swing operation demands different capacitor qualities than most other filtering applications, and the data sheet parameters available for commercial capacitors may be ineffective or require special care for calculating characteristics, such as efficiency and energy storage capability. This work presents an experimental setup for evaluating capacitor performance under a large voltage swing along with detailed experimental results. Energy storage data for a number of capacitors in the 50-630 V range from several manufacturers are included. The approach and findings of this paper can serve as an aid to power electronics designers for the selection and evaluation of capacitors in energy buffering applications.
CITATION STYLE
Barth, C. B., Foulkes, T., Moon, I., Lei, Y., Qin, S., & Pilawa-Podgurski, R. C. N. (2019). Experimental Evaluation of Capacitors for Power Buffering in Single-Phase Power Converters. IEEE Transactions on Power Electronics, 34(8), 7887–7899. https://doi.org/10.1109/TPEL.2018.2878825
Mendeley helps you to discover research relevant for your work.