Laser controlled melting of pre-treated zirconia surface

  • Yilbas B
  • Akhtar S
  • Karatas C
  • 17

    Readers

    Mendeley users who have this article in their library.
  • 7

    Citations

    Citations of this article.

Abstract

Laser treatment of pre-prepared zirconia surface is carried out. The pre-prepared surface, prior to laser treatment, consists of 50 μm carbon film and 7% titanium carbide particles, which are imbedded in the carbon film. The microstructural and morphological changes in the laser treated surface layer are examined using optical and scanning electron microscopes, energy dispersive spectroscopy, and X-ray diffraction. The fracture toughness of the laser treated surface is measured and the residual stress formed at the surface vicinity is determined from the X-ray diffraction technique. It is found that the microhardness of the laser treated surface increased slightly due to the dense layer formed at the surface vicinity. However, the laser treatment process reduces the fracture toughness of the surface due to improved surface hardness and the residual stress formed in the surface vicinity. © 2011 Elsevier B.V. All rights reserved.

Author-supplied keywords

  • Fracture toughness
  • Laser
  • Residual stress
  • Zirconia

Get free article suggestions today

Mendeley saves you time finding and organizing research

Sign up here
Already have an account ?Sign in

Find this document

Authors

Cite this document

Choose a citation style from the tabs below

Save time finding and organizing research with Mendeley

Sign up for free