Reflection and transmission modes in nanohole array based plasmonic sensors

  • Wu L
  • Bai P
  • Zhou X
 et al. 
  • 4


    Mendeley users who have this article in their library.
  • N/A


    Citations of this article.


Reflection and transmission modes are studied in a surface plasmon resonance sensor, where a nanohole array patterned gold film is deposited on a glass substrate, and the analyte in an aqueous medium is bound onto the patterned gold film. The reflection (transmission) mode means that light illuminates the structure from the analyte (substrate) side, and the detection is fixed at the analyte side. The two modes are studied by calculating absorption (and transmission) spectra and optical field distributions of the sensor. Study shows that both modes can excite the surface plasmon resonance on the analyte/gold interface which is useful for sensing. However, the optical field distribution at the resonant wavelength is different for the two modes and the effect is dependent on the gold film thickness. Comparing the sensing performance, the reflection mode gives larger resonant optical field enhancements (32 as compared to 22), but the transmission mode uses much thinner gold films (60 nm as compared to 150 nm). The optical power flow is analyzed to understand the fundamental difference between the two modes. These findings are particularly useful to guide the design of metallic nanostructure based plasmonic sensing systems.

Get free article suggestions today

Mendeley saves you time finding and organizing research

Sign up here
Already have an account ?Sign in

Find this document


  • L Wu

  • P Bai

  • X Zhou

  • E P Li

Cite this document

Choose a citation style from the tabs below

Save time finding and organizing research with Mendeley

Sign up for free