Removal of chromium (III) by using coal as adsorbent

  • Anwar J
  • Shafique U
  • Salman M
 et al. 
  • 18

    Readers

    Mendeley users who have this article in their library.
  • 40

    Citations

    Citations of this article.

Abstract

The adsorption of Cr(III) by two different coal varieties from Lakhra and Thar coalfields (Pakistan) have been studied in batch mode. The effect of adsorbent dose, pH, contact time and agitation speed on the adsorption of Cr(III) by both the coals were investigated. Adsorption equilibrium was achieved in 40-50 min. The Langmuir, Freundlich and Temkin adsorption isotherms were used to elucidate the observed sorption phenomena. The maximum Cr(III) removal was 2.61 mg of Cr(III) per gram of LC (Lakhra coal) and 2.55 mg of Cr(III) per gram of TC (Thar coal) as evaluated from Langmuir isotherm. The heat of sorption was in the range 3.75-3.87 kJ/mol as evaluated from Temkin isotherm. Best results were obtained at pH > 5. It is proposed that low rank coals of Pakistan can be used for removal of toxic metals like Cr(III) from industrial effluents/waste waters. © 2009 Elsevier B.V. All rights reserved.

Author-supplied keywords

  • Adsorption
  • Chromium
  • Coal
  • Freundlich isotherm
  • Langmuir isotherm
  • Temkin isotherm

Get free article suggestions today

Mendeley saves you time finding and organizing research

Sign up here
Already have an account ?Sign in

Find this document

Authors

Cite this document

Choose a citation style from the tabs below

Save time finding and organizing research with Mendeley

Sign up for free