Solution-deposited sodium beta-alumina gate dielectrics for low-voltage and transparent field-effect transistors

Abstract

Sodium beta-alumina (SBA) has high two-dimensional conductivity, owing to mobile sodium ions in lattice planes, between which are insulating AlO x layers. SBA can provide high capacitance perpendicular to the planes, while causing negligible leakage current owing to the lack of electron carriers and limited mobility of sodium ions through the aluminium oxide layers. Here, we describe sol-gel-beta-alumina films as transistor gate dielectrics with solution-deposited zinc-oxide-based semiconductors and indium tin oxide (ITO) gate electrodes. The transistors operate in air with a few volts input. The highest electron mobility, 28.0 cm 2 V 1 s 1, was from zinc tin oxide (ZTO), with an on/off ratio of 2×10 4. ZTO over a lower-temperature, amorphous dielectric, had a mobility of 10 cm 2 V 1 s 1. We also used silicon wafer and flexible polyimide-aluminium foil substrates for solution-processed n-type oxide and organic transistors. Using poly(3,4-ethylenedioxythiophene) poly(styrenesulphonate) conducting polymer electrodes, we prepared an all-solution-processed, low-voltage transparent oxide transistor on an ITO glass substrate. © 2009 Macmillan Publishers Limited. All rights reserved.