Mechanical properties of corn-legume based extrudates

Abstract

The effect of extrusion conditions, including feed rate (2.52-6.84 kg/h), feed moisture content (13-19% wet basis), screw speed (150-250 rpm), and extrusion temperature (150-260°C) on the mechanical properties of corn/legume-based extrudates was studied. White bean and lentil were used in mixtures with corn flour at a ratio of 10:90 up to 90:10 (corn:legume). Simple power models were used to correlate breaking stress and corresponding strain with extrusion conditions and material characteristics. The influence of feed rate on the extrudates mechanical properties was incorporated in the mean residence time. The breaking stress of extrudates decreased with temperature, residence time, and corn to legume ratio, and it increased with feed moisture content. The corresponding strain showed an opposite trend. Screw speed did not affect the extrudate properties. The use of lentil flour led to a product with higher breaking stress. Furthermore, in a previous work, the porosity of these products was modeled and, now, it was found that breaking stress and porosity of the extrudates could be correlated by an exponential relationship. Copyright © 2010 Taylor & Francis Group, LLC.