A midfringe locked interferometer with differential detection is proposed for non-contact optical sound measurement, and the equivalent noise level of approximately 0 dB SPL/Hz is achieved. The noise level of the proposed method is 30 dB lower than that of a very recent laser Doppler vibrometer and close to that of a quarter-inch measurement microphone. The midfringe locking stabilizes the optical interferometer against slow environmental fluctuations and enables detection of the acoustic signal directly from optical intensity. The differential detection method eliminates laser intensity noise, which is a dominant noise source in optical interferometers. The noise level of the constructed system was approximately 10 dB above the optical shot-noise (the classical detection limit attributed to the quantum nature of light) at frequencies higher than 2 kHz. Further noise reduction by several available methods could lead to optical measurements that are more sensitive than measurements by microphones. In addition, the constructed interferometer is used to reconstruct sound fields generated by a half-inch laboratory standard microphone used as a transmitter. The proposed method will be a powerful tool for measuring small-amplitude sound fields where it has been challenging to use existing methods.
CITATION STYLE
Ishikawa, K., Shiraki, Y., Moriya, T., Ishizawa, A., Hitachi, K., & Oguri, K. (2021). Low-noise optical measurement of sound using midfringe locked interferometer with differential detection. The Journal of the Acoustical Society of America, 150(2), 1514–1523. https://doi.org/10.1121/10.0005939
Mendeley helps you to discover research relevant for your work.