Thermodynamic work of adhesion measurements of polymer bonded explosive constituents via the Wilhelmy plate technique and their application to AFM pull-off experiments

Abstract

A major strength limiting factor for polymer bonded explosives above their glass-transition conditions is the magnitude of adhesion that exists between the polymeric matrix binder-system and the filler particles. Experimental measurements of the components of the free surface energy of the binder KEL-F8OO have been made using the Wilhelmy Plate technique. These data can be combined with equivalent data on the filler particles to calculate the so-called Thermodynamic Work of Adhesion. This under-pinning quantity can be used to predict the levels of load (stress) required to cause debonding in different geometries. A simple geometry of interest is a spherical-cap of polymer debonding from a flat substrate. Experiments using this geometry have been performed with an Atomic Force Microscope pulloff technique to measure the critical loads (stresses) required for debonding. There is excellent agreement between the predicted values based on the Wilhelmy Plate data and the measured values from the Atomic Force Microscope. Experimental data and understanding are required for the development and validation of microstructural models of mechanical behaviour. © Published under licence by IOP Publishing Ltd.