Experimental constrains on shear-induced crystal breakage in magmas

24Citations
Citations of this article
50Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Crystal breakage occurs along margins of conduit walls and basal zones of lava flows. It is usually interpreted as flow-related textures developed at large finite strains and strains rates. We have investigated the grain size and shape distributions in an experimentally deformed crystal melt suspension in order to constrain the temperature T, the strain , and the strain rate r ranges of the crystal breakage process. The starting crystal melt suspension is composed of a haplogranitic melt with 54 vol % alumina crystals. Torsion experiments were performed in a gas medium Paterson apparatus at 300 MPa confining pressure and subsolidus temperatures. Crystal size distribution and aspect ratio of alumina grains were measured on polished sections normal to the shear direction, i.e., from the center to the rim of the deformed cylinders. A first minor occurrence of crystal breakage is evidenced in all experiments and low strains. It is related to intense stress localization at some grain contacts in the initially connected solid framework. A second intense and penetrative crystal breakage process is observed for T 550C and r > 6.2 × 10-4 s-1. The evolution of the size distribution as a function of finite strain and the reduced aspect ratios of preserved largest crystals in intensely strained zones support that breakage occurs by abrasion of the larger crystals. This abrasion can be attributed to the partial stress propagation over both the melt and partially isolated crystals under viscoelastic conditions. Mechanical data show a transition from slight shear softening at low strain rates and highest temperatures to strain hardening for experiments that produced penetrative crystal breakage. The crystal melt suspension exhibits a shear thinning behavior with a stress exponent larger than 2.06 over the explored strain rate and temperature domain for the experiments without intensive crystal breakage. Our results are applicable to the interpretation of the crystal breakage often observed at the base of lava flows, in domes, and near conduit walls. This experimental reproduction of a process observed in nature is important because the controls of stress-induced breakage we quantified are also key parameters governing magma transport. Copyright © 2011 by the American Geophysical Union.

Cite

CITATION STYLE

APA

Forien, M., Arbaret, L., Burgisser, A., & Champallier, R. (2011). Experimental constrains on shear-induced crystal breakage in magmas. Journal of Geophysical Research: Solid Earth, 116(8). https://doi.org/10.1029/2010JB008026

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free