Influence of sampling intensity on performance of two-phase forest inventory using airborne laser scanning

Abstract

Background: Forest inventories have always been a primary information source concerning the forest ecosystem state. Various applied survey approaches arise from the numerous important factors during sampling scheme planning. Paramount aspects include the survey goal and scale, target population inherent variation and patterns, and available resources. The last factor commonly inhibits the goal, and compromises have to be made. Airborne laser scanning (ALS) has been intensively tested as a cost-effective option for forest inventories. Despite existing foundations, research has provided disparate results. Environmental conditions are one of the factors greatly influencing inventory performance. Therefore, a need for site-related sampling optimization is well founded. Moreover, as stands are the basic operational unit of managed forest holdings, few related studies have presented stand-level results. As such, herein, we tested the sampling intensity influence on the performance of the ALS-enhanced stand-level inventory. Results: Distributions of possible errors were plotted by comparing ALS model estimates, with reference values derived from field surveys of 3300 sample plots and more than 300 control stands located in 5 forest districts. No improvement in results was observed due to the scanning density. The variance in obtained errors stabilized in the interval of 200–300 sample plots, maintaining the bias within +/− 5% and the precision above 80%. The sample plot area affected scores mostly when transitioning from 100 to 200 m2. Only a slight gain was observed when bigger plots were used. Conclusions: ALS-enhanced inventories effectively address the demand for comprehensive and detailed information on the structure of single stands over vast areas. Knowledge of the relation between the sampling intensity and accuracy of ALS estimates allows the determination of certain sampling intensity thresholds. This should be useful when matching the required sample size and accuracy with available resources. Site optimization may be necessary, as certain errors may occur due to the sampling scheme, estimator type or forest site, making these factors worth further consideration.