Analysis of industrial boiler solid waste impacts

Abstract

This paper presents an examination of industrial coal-fired boiler waste products. Presently the atmospheric emissions from all new boilers larger than 250 × 106 Btu/hr are controlled by existing New Source Performance Standards, and boilers smaller than 250 × 106 Btu/hr are controlled to levels required by the regulations of the particular state in which the facility is located. The 1977 Clean Air Act Amendments, however, specify categories of sources for which EPA must develop revised New Source Performance Standards. Industrial coal-fired boilers are included as one of these categories, and a relevant issue concerns the potential amount of solid waste generated as a result of tightened emission standards that require flue gas desulfurization. This paper examines the air quality and solid waste impacts of moderate and stringent emission controls for particulate and SO2 emissions from industrial coal-fired boilers. Comparisons are presented of physical and chemical characterizations of the emissions and solid wastes produced when boilers are equipped with particulate and SO2 control equipment. The SO2 systems examined are lime spray drying, lime/limestone, double alkali, sodium throwaway, physically cleaned coal, and fluidized-bed combustion. The solid waste disposal alternatives and the disposal costs are discussed. The most common disposal methods used are landfill for dry wastes and impoundment for sludges, with special wastewater treatment requirements for the sodium throwaway aqueous wastes. © 1981 Air & Waste Management Association.