Incorporation of Pd Catalyst into Highly Effective Borophene Nanosheet Co-Catalyst for Electrokinetics and Electrochemical Oxygen Reduction Reactions

Abstract

To improve the performance of the system, it is of great importance to develop efficient catalysts for ethanol (EtOH) electro-oxidation. Pd/B electrocatalyst was synthesized using a sonochemical method. Structural and electrochemical properties of the prepared nanomaterial were investigated using electrochemical and physical techniques such as Raman spectroscopy, electrochemical impedance spectroscopy (EIS), x-ray diffraction (XRD), zetersizer, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM) and energy-dispersive x-ray spectroscopy (EDS) and cyclic voltammetry (CV). FTIR confirmed all the functional groups of carbon black, Pd/C, borophene, and Pd/B, and the crystallinity was investigated using XRD. EIS showed that Pd/B has a faster charge transfer and, through investigation using CV, Pd/B showed a more negative onset potential and higher current (−0.76 V vs. Ag|AgCl; 0.07 mA) than Pd/C (−0.65 V vs. Ag|AgCl; 0.05 mA), indicating a more catalytic behavior and tolerance of Pd/B. The active sites could be attributed to the addition of borophene. During the anodic sweeping direction of Pd/B electrocatalyst, it was observed that the ratio of backward peak current (Ibwd) to forward peak current (Ifwd), (Ibwd/Ifwd) of in a 2 M of NaOH + 2 M of EtOH is almost equal to (Ibwd/Ifwd) 1 which shows excellent tolerance of Pd/B to poisoning by ethanol intermediate species. The electron transfer rate (Ks) values for Pd/B at 0.1 M, 0.5 M, 1 M, 1.5 M, and 2 M were estimated to be 4.50 × 10−13 s−1, 1.08 × 10−12 s−1, 4.28 × 10−13 s−1, 5.25 × 10−14 s−1 and 9.35 × 10-14 s−1. At 2 M there is a faster electron transfer than at other concentrations which is also evidenced by the obtained diffusion values (D) of the system which were found to be 2.92 × 10−7 cm2 s−1, 4.72 × 10−8 cm2 s−1, 4.82 × 10−8 cm2 s−1, 1.22 × 10−7 cm2 s−1, and 9.12 × 10−8 cm2 s−1. The electrochemically active surface area (ECSA) is strongly related to intrinsic activity, Pd/B (1.85 cm2/mg × 10−5 cm2/mg) denotes the highest Pd-O stripping charge than Pd/C (1.13 cm2/mg × 10−5 cm2/mg).