Performance of introducing outdoor cold air for cooling a plant production system with artificial light

12Citations
Citations of this article
21Readers
Mendeley users who have this article in their library.

Abstract

The commercial use of a plant production system with artificial light (PPAL) is limited by its high initial construction and operation costs. The electric-energy consumed by heat pumps, applied mainly for cooling, accounts for 15-35% of the total electric-energy used in a PPAL. To reduce the electric-energy consumption, an air exchanger with low capacity (180 W) was used for cooling by introducing outdoor cold air. In this experiment, the indoor air temperature in two PPALs (floor area: 6.2 m2 each) was maintained at 25 and 20°C during photoperiod and dark period, respectively, for lettuce production. A null CO2 balance enrichment method was used in both PPALs. In one PPAL (PPALe), an air exchanger (air flow rate: 250 m3.h-1) was used along with a heat pump (cooling capacity: 3.2 kW) to maintain the indoor air temperature at the set-point. The other PPAL (PPALc) with only a heat pump (cooling capacity: 3.2 kW) was used for reference. Effects of introducing outdoor cold air on energy use efficiency, coefficient of performance (COP), electric-energy consumption for cooling and growth of lettuce were investigated. The results show that: when the air temperature difference between indoor and outdoor ranged from 20.2 to 30.0°C: (1) the average energy use efficiency of the air exchanger was 2.8 and 3.4 times greater than the COP of the heat pumps in the PPALe and PPALc, respectively; (2) hourly electric-energy consumption for cooling in the PPALe reduced by 15.8-73.7% compared with that in the PPALc; (3) daily supply of CO2 in the PPALe reduced from 0.15 to 0.04kg compared with that in the PPALc with the outdoor air temperature ranging from -5.6 to 2.7°C; (4) no significant difference in lettuce growth was observed in both PPALs. The results indicate that using air exchanger to introduce outdoor cold air should be considered as an effective way to reduce electric-energy consumption for cooling with little effects on plant growth in a PPAL.

References Powered by Scopus

High-temperature preconditioning and thermal shock imposition affects water relations, gas exchange and root hydraulic conductivity in tomato

185Citations
N/AReaders
Get full text

Growth and quality responses of 'Green Oak Leaf' lettuce as affected by monochromic or mixed radiation provided by fluorescent lamp (FL) and light-emitting diode (LED)

150Citations
N/AReaders
Get full text

Significant reduction in energy for plant-growth lighting in space using targeted LED lighting and spectral manipulation

118Citations
N/AReaders
Get full text

Cited by Powered by Scopus

Controlled environment food production for urban agriculture

101Citations
N/AReaders
Get full text

A combination of downward lighting and supplemental upward lighting improves plant growth in a closed plant factory with artificial lighting

35Citations
N/AReaders
Get full text

Circadian oscillation of the lettuce transcriptome under constant light and light-dark conditions

24Citations
N/AReaders
Get full text

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Cite

CITATION STYLE

APA

Wang, J., Tong, Y., Yang, Q., & Xin, M. (2016). Performance of introducing outdoor cold air for cooling a plant production system with artificial light. Frontiers in Plant Science, 7(MAR2016). https://doi.org/10.3389/fpls.2016.00270

Readers over time

‘16‘17‘18‘19‘20‘21‘22‘23‘2402468

Readers' Seniority

Tooltip

PhD / Post grad / Masters / Doc 12

75%

Researcher 3

19%

Lecturer / Post doc 1

6%

Readers' Discipline

Tooltip

Agricultural and Biological Sciences 9

64%

Engineering 3

21%

Materials Science 1

7%

Energy 1

7%

Article Metrics

Tooltip
Mentions
Blog Mentions: 1

Save time finding and organizing research with Mendeley

Sign up for free
0