A Frequency-Tunable Fractional-N PLL for High-Energy Physics Experiments

6Citations
Citations of this article
6Readers
Mendeley users who have this article in their library.

Abstract

A frequency-tunable phase-locked loop (PLL) applied in high-energy particle detectors has been developed. To achieve high detection efficiency, high requirements are promoted for an on-chip clock in CMOS pixel sensors, which requires high precision and low power consumption for the PLL. The proposed PLL employs a fractional-N frequency division structure. An LC voltage-controlled oscillator ( LC -VCO) is used to generate the local clock. A third-order MASH sigma-delta ( \Sigma -\Delta ) modulator is used to alleviate the quantization noise introduced by the fractional-N frequency divider. To further reduce the phase noise (PN), preset and postset binary frequency dividers are employed. In the prototype chip, a low dropout regulator (LDO) is integrated to suppress the power supply noise. The PLL was designed and fabricated in a 180-nm CMOS process. It costs an area of 1.29 mm2 and a power of 8.1 mW at a 1.8-V power supply. The measured output frequency range is 400-530 MHz with a reference frequency of 25-35 MHz. The rms jitter, integrated from 100 kHz to 100 MHz, is 4.8 ps at 526 MHz. The in-band spur is less than -61 dBc, and the PN at 1-MHz frequency offset is less than -113 dBc/Hz.

Cite

CITATION STYLE

APA

Gong, Y., Yan, W., Luo, M., Wang, C., & Zhang, L. (2023). A Frequency-Tunable Fractional-N PLL for High-Energy Physics Experiments. IEEE Transactions on Nuclear Science, 70(4), 722–729. https://doi.org/10.1109/TNS.2023.3254645

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free