Effect of Low Chloride and Sulfate Concentrations on Corrosion Behavior of Aluminum and Zinc Arc Thermal Sprayed Coatings

Abstract

The aim of this study was to determine the suitability of arc sprayed zinc and aluminum coatings as materials for protective coatings of different heating systems. The most aggressive chemical agents occurring in heating water are chloride and sulfate anions. Both ions are responsible for the corrosion of metals due to their high electronegativity and standard electrochemical potential. Water in heating systems should not contain more than 150 mg/L anions, including no more than 50 mg/L of chlorides and 100 mg/L of sulfates. To determine the corrosion resistance of three types of zinc and aluminum coatings, open circuit potential and linear polarization resistance (LPR) tests were conducted in eight alkaline solutions with different sulfate and chloride contents. The SEM/EDS structural properties of sprayed coatings at specific arc process parameters were investigated. Zinc coatings exhibit the most stable corrosion potentials in varying environments but have higher corrosion current density. Aluminum coatings exhibit much higher potential values in a chloride environment than in any other. A chloride environment also causes the lowest corrosion rates for aluminum-coated samples. A small addition of aluminum to the zinc coating (15 wt.%) does not appear to affect the stability of the corrosion potential but does result in a reduction in corrosion rates in chloride solutions.