We report on the effect of sputtering deposition of indium tin oxide (ITO) as the transparent conductive oxide layer on the passivation performance of hydrogenated amorphous silicon/crystalline silicon heterojunctions. The influence of sputtering damage on passivation performance is studied by varying the ITO layer thickness from 0 nm to 80 nm. The passivation performance decreases considerably up to 10 nm and increases gradually from 20 nm to 80 nm, indicating that damage and recovery stages are present during the sputtering process. We focus on the injection energy as the cause of the recovery phenomenon. To optimize the passivation performance by intentionally enhancing the effect of the recovery stage while minimizing the initial damage at the heterointerface, we develop a two-step sputtering process in which the radiofrequency power is changed from 50 W to 100 W during deposition to prepare ITO double layers. Two step sputtering gives the lower damage, and the properties of ITO double layers are better than those of ITO single layers. These results show that two-step sputtering can realize greater a-Si:H passivation. Furthermore, better optical properties are obtained in ITO double layers compared with conventional ITO single layers. Therefore, modulating the radiofrequency power during ITO deposition can offer higher conversion efficiency.
CITATION STYLE
Semma, M., Gotoh, K., Wilde, M., Ogura, S., Kurokawa, Y., Fukutani, K., & Usami, N. (2020). Impact of deposition of indium tin oxide double layers on hydrogenated amorphous silicon/crystalline silicon heterojunction. AIP Advances, 10(6). https://doi.org/10.1063/5.0009994
Mendeley helps you to discover research relevant for your work.