Impact of Chemically Treated Waste Rubber Tire Aggregates on Mechanical, Durability and Thermal Properties of Concrete

50Citations
Citations of this article
136Readers
Mendeley users who have this article in their library.

Abstract

Studies have shown that the incorporation of waste tire rubber aggregates reduces the strength, increases permeability and decrease thermal conductivity of concrete. However, only a few studies have investigated the effect of surface-modified rubber aggregates on the properties of concrete. This study investigates the effect of the surface treatment of waste tire rubber as coarse aggregates with different oxidizing solutions and different treatment durations on the mechanical, durability and thermal properties of concrete. The properties of concrete incorporated with 8% rubber coarse aggregates (by volume of natural aggregates) which were treated with three different solutions: water (H2O), 20% sodium hydroxide (NaOH) and 5% calcium hypochlorite [Ca(ClO)2] (both as% weight of water) for durations of 2, 24, and 72 h, respectively. The effect of these treatments on the compressive strength, splitting tensile strength, water permeability, thermal conductivity and diffusivity of concrete was investigated. Results show that Ca(ClO)2 has a more positive effect on the strength and permeability compared to NaOH solution and water. Experimental results were statistically analyzed using ANOVA and Post Hoc tests. The analyses showed that the improvement of concrete strength is only significant when the treatment with NaOH and Ca(ClO)2 is prolonged to 72 h. Furthermore, the microstructural analysis of concrete showed that the improvement in the strength is due to the improved bonding between cement paste and rubber aggregates as a result of surface treatment. This microstructural improvement also resulted in lower water permeability of concrete. However, the thermal conductivity and diffusivity increased when the surface treatment duration increases as there are less air voids in the samples. This study shows that, with appropriate pretreatment, a certain percentage of natural aggregates can be safely replaced with waste tire rubber aggregates while maintaining sufficient quality of the resulting concrete.

References Powered by Scopus

The interfacial transition zone (ITZ) between cement paste and aggregate in concrete

1111Citations
N/AReaders
Get full text

Scrap-tyre-rubber replacement for aggregate and filler in concrete

725Citations
N/AReaders
Get full text

Rubberized Portland cement concrete

685Citations
N/AReaders
Get full text

Cited by Powered by Scopus

Recent advances in the concrete industry to reduce its carbon dioxide emissions

213Citations
N/AReaders
Get full text

Research on the properties of rubber concrete containing surface-modified rubber powders

88Citations
N/AReaders
Get full text

Silane Coupling Agent Modification Treatment to Improve the Properties of Rubber-Cement Composites

53Citations
N/AReaders
Get full text

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Cite

CITATION STYLE

APA

Khern, Y. C., Paul, S. C., Kong, S. Y., Babafemi, A. J., Anggraini, V., Miah, M. J., & Šavija, B. (2020). Impact of Chemically Treated Waste Rubber Tire Aggregates on Mechanical, Durability and Thermal Properties of Concrete. Frontiers in Materials, 7. https://doi.org/10.3389/fmats.2020.00090

Readers' Seniority

Tooltip

PhD / Post grad / Masters / Doc 28

60%

Researcher 10

21%

Lecturer / Post doc 5

11%

Professor / Associate Prof. 4

9%

Readers' Discipline

Tooltip

Engineering 42

82%

Chemistry 4

8%

Chemical Engineering 3

6%

Agricultural and Biological Sciences 2

4%

Save time finding and organizing research with Mendeley

Sign up for free