Giant pressure sensitivity in piezo/ferro-electric ceramics

18Citations
Citations of this article
17Readers
Mendeley users who have this article in their library.

Abstract

We report the fabrication of single-phase polycrystalline Pb0.85Bi0.10(Zr0.52Ti0.48)O3 (PBiZT) ceramic which shows large polarization, i.e., ∼40 μC cm-2 and piezoelectric coefficients ∼130 pC N-1 and giant linear change in capacitive reactance and dielectric properties with increasing and decreasing pressure in the range of 1 kHz to 5 MHz. Nearly 70% change in dielectric constant and 56% change in capacitive reactance were obtained in the pressure range of 20-200 MPa, which makes it suitable for applications as a capacitive pressure sensor/gauge. The sensitivity of the device is calculated as 0.66 MPa-1 and 18.2 MPa-1 at 1 MHz and 5 MHz, respectively, which is the highest ever reported value so far for any bulk polycrystalline ceramic. The compressive stress of the device was tested according to the standard test method as a function of linear and volumetric strain, which yields the Young's modulus, Bulk modulus, and Poisson's ratio of the device. These values were further utilized to calculate actual stress in the sample and energy density using ANSYS software, which indicates at least four orders smaller pressure in the sample compared to the applied pressure.

Cite

CITATION STYLE

APA

Thakur, V. N., Singh, B. P., Yadav, S., & Kumar, A. (2020). Giant pressure sensitivity in piezo/ferro-electric ceramics. RSC Advances, 10(15), 9140–9145. https://doi.org/10.1039/d0ra00484g

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free