Effect of multiple enamel surface treatments on micro‐shear bond strength

Abstract

Objectives: The aim of this study was to evaluate the effect of different enamel surface treatments on the micro‐shear bond strength. Materials and methods: Sixty‐four approximal surfaces from freshly extracted molars were randomly assigned to eight groups, according to combinations of the following enamel surface treatments: ground or unground, 37.5% phosphoric acid etching time of 15 or 30 s, and with or without primer application. The same bonding agent (Optibond FL™ Adhesive, Kerr) was then used for all groups, and a 1.8 mm diameter resin composite (Harmonize™, Kerr) cylinder was built up on the bonded surface. Samples underwent a shear force test at a crosshead speed of 1 mm/min until failure. Bond strength was calculated, and failure modes were inspected under an optical microscope. Results: Bond‐strength values ranged from 8.2 MPa for 15 s etched unground enamel with primer application to 19.6 MPa for 30 s etched ground enamel without primer application. ANOVA and Fisher’s LSD post hoc tests revealed significant differences between the groups. Conclusions: Etching time and grinding have a statistically significant effect on the micro‐shear bond strength of a three‐step etch‐and‐rinse adhesive system on enamel. Primer application does not seem to be beneficial for enamel adhesion.