Rapid fabrication by digital light processing 3d printing of a slipchip with movable ports for local delivery to ex vivo organ cultures

Abstract

SlipChips are two‐part microfluidic devices that can be reconfigured to change fluidic pathways for a wide range of functions, including tissue stimulation. Currently, fabrication of these devices at the prototype stage requires a skilled microfluidic technician, e.g., for wet etching or alignment steps. In most cases, SlipChip functionality requires an optically clear, smooth, and flat surface that is fluorophilic and hydrophobic. Here, we tested digital light processing (DLP) 3D print-ing, which is rapid, reproducible, and easily shared, as a solution for fabrication of SlipChips at the prototype stage. As a case study, we sought to fabricate a SlipChip intended for local delivery to live tissue slices through a movable microfluidic port. The device was comprised of two multi‐layer components: an enclosed channel with a delivery port and a culture chamber for tissue slices with a permeable support. Once the design was optimized, we demonstrated its function by locally de-livering a chemical probe to slices of hydrogel and to living tissue with up to 120 μm spatial reso-lution. By establishing the design principles for 3D printing of SlipChip devices, this work will en-hance the ability to rapidly prototype such devices at mid‐scale levels of production.