Leaching of Gold and Silver from a Complex Sulfide Concentrate in Copper-Tartrate-Thiosulfate Solutions

Abstract

The leaching behaviors of gold and silver from a complex sulfide concentrate in copper-tartrate-thiosulfate solutions were investigated in this paper. Experimental parameters, including temperature, initial pulp pH, and concentration of copper, tartrate, and thiosulfate, were systematically studied. The copper-tartrate-thiosulfate leaching system exhibits promising performance in dealing with the complex sulfide concentrate. Thiosulfate consumption could be greatly reduced due to the in-situ generation of thiosulfate derived from sulfur or disulfide ions. Increasing the temperature and concentrations of copper, tartrate, and thiosulfate can promote gold leaching. A low tartrate content and a moderate increase in temperature and copper and thiosulfate concentrations can accelerate silver leaching, but a higher temperature or copper content may depress silver extrac-tion. A suitable pulp pH is critical for gold and silver leaching in copper-tartrate-thiosulfate solutions. An extraction of 74.50% Au and 36.33% Ag was obtained with the direct leaching of the concentrate, while the percentages can be significantly increased up to 82.60% and 70.38%, respectively, when leaching the calcine following the oxidative roasting pretreatment. The recycling of leaching solutions demonstrates that a suitable free tartrate content is of great significance in maintaining the stability of the novel system. As an alternative to the traditional cyanide or copper-ammonia-thiosulfate leaching processes, the copper-tartrate-thiosulfate leaching system provides an environmentally friendly, nontoxic, and relatively low-cost method for gold and silver leaching from ores or concentrates.