Influence of coating properties on paper-to-paper friction of coated paper

Abstract

Coated paper-to-coated paper friction properties were examined in relation to printing runnability difficulties like erroneous double feeding of paper sheets. Higher ratios of precipitated calcium carbonate (PCC) to clay in mixed pigment coatings resulted in higher static and kinetic coefficients of friction (COFs). Microroughness in the order of pigment particle size is considered to relate to COF, because cube-shaped particles of PCC resist sliding. Calendering decreased COF at larger amounts of PCC, but did not change COF of the sole clay formulation at all. Addition of ground calcium carbonate (GCC) decreased COF. The rate of decrease in kinetic COF with increasing number of sliding for the GCC-rich formulation was higher than that for the PCC-rich formulation, presumably because protruding parts, characteristic of the GCC-rich formulation, on the surface were selectively flattened. Addition of styrene-butadiene (SB)-latex up to 14pph decreased COF, but static COF had the highest value at 18pph. The antislip property (as a rubber) of SB-latex developed only in the static mode. Among lubricants formulated, the wax type decreased COF the most remarkably with more effect on kinetic COF than on static COF. © 2006 The Japan Wood Research Society.