Fabrication Protocol for Thermoplastic Microfluidic Devices: Nanoliter Volume Bioreactors for Cell Culturing

Abstract

Microfluidic devices consist of microchannels etched or embossed into substrates made of polymer, glass or silicon. Intricate connections of the microchannels to reactors with some smart mechanical structures such as traps or curvatures fulfil the desired functionalities such as mixing, separation, flow control or setting the environment for biochemical reactions. Here, we describe the fabrication methods of a thermoplastic microbioreactor step by step. First, material selection is made, then, production methods are determined with the equipment that can be easily procured in a laboratory. COP with its outstanding characteristics among many polymers was chosen. Two types of microbioreactors, with and without electrodes, are designed with AutoCAD and L-edit softwares. Photolithography and electrochemical wet etching are used for master mold preparation. Thermal evaporator is employed for pure chromium and gold deposition on COP substrate and etchants are used to form the interdigitated electrodes. Once the master mold produced, hot embossing is used to obtain the designed shape on drilled and planarized COP. Cover COP, with or without electrodes, is bonded to the hot embossed COP via thermo-compression and thermoplastic microfluidic device is realized. Tubings are connected to the device and a bridge between the macro and micro world is established. Yeast or mammalian cells labeled or tagged with GFP/RFP on specific gene products are loaded into the microfluidic device, and real time data on cell dimensions and fluorescence intensity are collected using inverted fluorescence microscope, and finally image processing is used to analyze the acquired data.