Numerical Analysis of Thermal Performance of Heat Exchanger Different Plate Structures and Fluids

Abstract

Due to compact size, high power density, low cost and short construction time, the small modular reactors are considered as one of the candidate reactors, in which the power generation system is important with a compact heat exchanger for modular construction. Therefore, the effect of plate structure and nature of the working fluid on the thermal performance of plate heat exchanger are ana-lyzed for the design of compact and efficient heat exchanger. The heat transfer rate, temperature counters, velocity vectors, and pressure drop have been opti-mized and investigated using FLUENT. The Nusselt number has been calculated for the corrugated and flat plate heat exchanger to validate the convective heat transfer. The numerical results are agreed well with correlation within deviation of ~5-7%. The performance of heat exchanger can be improved by controlling the mass-flow rate, and temperature of working fluid. The corrugation plate heat ex-changer increases the heat transfer rate 20% and effectiveness 23%, respectively, as compare to flat plate heat exchanger when the working fluid is water. In the case of air, heat transfer rate, and effectiveness are about 10% and 9%, respec-tively. The results show that the corrugated plate heat exchanger is more effective than the flat plate heat exchanger because corrugation pattern enhances the tur-bulence of fluids, which further increase heat transfer rate and coefficient. The selection of the working fluid and structure of the plate must be considered care-fully for efficient and compact design of heat exchanger.