Inkjet printing of highly sensitive, transparent, flexible linear piezoresistive strain sensors

12Citations
Citations of this article
32Readers
Mendeley users who have this article in their library.

Abstract

Flexible strain sensors are fabricated by using a simple and low-cost inkjet printing technology of graphene-PEDOT: PSS (poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate)) conductive ink. The inkjet-printed thin-film resistors on a polyethylene terephthalate (PET) substrate exhibit an excellent optical transmittance of about 90% over a visible wavelength range from 400 to 800 nm. While an external mechanical strain is applied to thin-film resistors as strain sensors, a gauge factor (GF) of the piezoresistive (PR) strain sensors can be evaluated. To improve the GF value of the PR strain sensors, a high resistive (HR) path caused by the phase segregation of the PEDOT: PSS polymer material is, for the first time, proposed to be perpendicular to the PR strain sensing direction. The increase in the GF with the increase in the HR number of the PR strain sensors without a marked hysteresis is found. The result can be explained by the tunneling effect with varied initial tunneling distances and tunneling barriers due to the increase in the number of HR. Finally, a high GF value of approximately 165 of three HR paths is obtained with a linear output signal at the strain range from 0% to 0.33%, further achieving for the inkjet printing of highly sensitive, transparent, and flexible linear PR strain sensors.

Cite

CITATION STYLE

APA

Kang, T. K. (2021). Inkjet printing of highly sensitive, transparent, flexible linear piezoresistive strain sensors. Coatings, 11(1), 1–8. https://doi.org/10.3390/coatings11010051

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free