A Novel Modular TLP-Design for Offshore Wind Turbines Using Ultra High Performance Concrete

4Citations
Citations of this article
16Readers
Mendeley users who have this article in their library.
Get full text

Abstract

Floating substructures for wind turbines are commonly credited for enabling the offshore wind industry, so far focused on fixed substructures, to expand into deeper waters. As per Arent et al. (Improved offshore wind resource assessment in global climate stabilization scenarios, [4]), 77% of global offshore wind potential is located in water depths deeper than 60 m. However, floating substructures do not yet meet the market expectations with regard to LCOE. By integrating new materials as well as modularity into the design, the costs of the tension leg platform (TLP) development presented in this pater have been significantly reduced. Pre-stressed Ultra-High-Performance-Concrete (UHPC) pipes will be used for this sub-structure. The buoyancy bodies will be fabricated using concrete shell elements known from tunnel engineering. The use of casted iron for the nodes and the Transition Piece (TP) leads to further advantages regarding design and costs. All components are designed for transportability (e.g. via railway) in order to ensure a high level of flexibility within the supply chain. The structural design has been calculated to support turbines of up to 6 MW rated power and more. In October 2017, a scaled model (1:50) of the new substructure design for use with a 6 MW turbine was successfully exposed to wind and wave loads at the Ocean Engineering Tank of the École Centrale de Nantes (ECN). In June 2018, a second measurement campaign was started, and in September 2018 a third campaign will be run to verify the transport & installation process. Th presentation and paper will focus on the TLP design as well as on the model fabrication and scaling. Furthermore, measurement results from the ECN test will be presented. Therefore, the presentation will introduce the measurement setup as well as the measurement types to verify the simulation model. Finally, the verification of the simulation model with the measurements will be highlighted.

Cite

CITATION STYLE

APA

Adam, F., Walia, D., Hartmann, H., Schünemann, P., & Großmann, J. (2020). A Novel Modular TLP-Design for Offshore Wind Turbines Using Ultra High Performance Concrete. In Lecture Notes in Civil Engineering (Vol. 37, pp. 257–268). Springer. https://doi.org/10.1007/978-981-13-7603-0_26

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free