The effect of welding conditions on solidification cracking susceptibility of type 310S stainless steel during laser welding using an in-situ observation technique

Abstract

Solidification cracking occurs easily at high welding speeds, and should therefore occur more easily during laser welding. Both the solidification behavior and thermal strain change depend on the welding speed, and therefore, the critical strain for solidification cracking must be measured to clarify the factors influencing the solidification cracking susceptibility. However, the critical strain required for solidification cracking under high welding speed conditions has not yet been determined. The aim of this work was to investigate the effect of welding speed on the solidification cracking susceptibility of Type 310S stainless steel. U-type hot cracking tests were conducted using a developed in-situ observation technique with high-speed camera, and the critical strain for solidification cracking was evaluated quantitatively. The critical strain for solidification crack initiation decreased with increasing welding speed. The distribution of residual liquid depended on the microstructure, and the morphological distribution of the residual liquid changed from a droplet to a thin film with increasing welding speed. The transition in distribution morphology of the residual liquid implies the material is susceptible to solidification cracking. © 2013 The Author(s).