A Novel Treatment: Effects of Nano-Sized and Micro-Sized Al2O3 on Steel Surface for the Shear Strength of Epoxy–Steel Single-Lap Joints

Abstract

Traditional steel surface treatment (e.g., sand blasting, or silane treatment) was regarded as an effective method to improve the bonding strength of steel–epoxy single-lap joints. In the present study, a new steel surface treatment method was developed. With this method, the steel surfaces were treated with suspensions of nano-sized and micro-sized Al2O3 particles in ethanol/water mixture using the dip-coating method. Both Al2O3 particle sizes were previously treated or not treated with silane. Single-lap shear tests of the steel–epoxy bonds were conducted to compare the effects of the treating methods. According to the testing results, the highest increase in the bonding strength (by 51.8%) was found for the steel coated with the suspension of silane treated nano-Al2O3 particles. Scanning electron microscopy (SEM) analysis and energy dispersive spectrometer (EDS) analysis indicates that the nano-Al2O3 particles were clearly attached to the treated steel surfaces. Moreover, the steel surface with the silane-treated nano-Al2O3 particles was found to clearly enhance the contact angle between the steel and epoxy resin. The fracture morphology analysis of the single-lap shear testing specimen shows that the bonding between the steel and adhesive changed from steel–epoxy interfacial failure to cohesive failure when the steel surfaces were treated with the nano-Al2O3 particles suspension. The developed steel surface treatment method with the suspension of nano-particles proves to be effective and reliable in enhancing the bonding strength of the steel-to-epoxy adhesives.