Effects of humidity pretreatment devices on the loss of hcl gas emitted from industrial stacks

Abstract

A high humidity at a high temperature presents a common challenge in monitoring the air pollutants emitted from stationary sources. Thus, humidity removal is a pivotal issue. In this study, the effect of humidity pretreatment devices (HPDs) on hydrogen chloride (HCl) gas emitted from an incinerator stack was investigated. A conventional cooler (HPD_CL), and poly-tube (HPD_NP) and single-tube (HPD_NS) Nafion™ dryers were used as HPDs in this study. HCl concentrations varied at five and 10 parts per million in volume (ppmv). Low (i.e., ~4%) and high (i.e., ~17%) humidities were generated at 180◦C. The removal efficiencies of humidity and the loss rates of HCl by the devices were determined. The removal efficiencies of humidity by HPD_CL and the two dryers were found to be similar, at approximately 85% at a low humidity and 95% at a high humidity. In terms of HCl loss rates, HPD_CL revealed the highest loss rates in all conditions (i.e., >95%), followed by HPD_NP and HPD_NS. At normal room temperature (i.e., 25◦C), the HCl loss rates of HPD_NP were >40% at a low humidity and >70% at a high humidity, while those of HPD_NS were >10% at a low humidity and >60% at a high humidity. The performance of the two dryers improved when they were heated to 80◦C. However, this temperature caused damage to the dryers, which reduced their lifetime.