Coordinate measuring machines (CMM) are essential for quality assurance and production control in modern manufacturing. Due to the necessity of assuring trace-ability during the use of CMM interim checks with calibrated objects have to be carried out periodically. For this purpose usually special artifacts like standardized ball plates, hole plates, ball bars or step gages are measured. Measuring calibrated series parts would be more advantageous. Applying the substitution method acc. ISO 15530-3 [ISO 15530-3, 2000] such parts can be used. It is less cost intensive and less time consuming than measuring expensive special standardized objects in special programmed measurement routines. Moreover, measurement results can be directly compared with the calibration values; thus direct information on systematic measurement deviations and uncertainty of the features to be measured are available. The paper deals with a procedure for monitoring horizontal-arm CMMs with calibrated sheet metal series parts. © 2007 Springer.
CITATION STYLE
Weckenmann, A., Beetz, S., & Lorz, J. (2007). Monitoring coordinate measuring machines by user-defined calibrated parts. In Models for Computer Aided Tolerancing in Design and Manufacturing - Selected Conference Papers from the 9th CIRP International Seminar on Computer-Aided Tolerancing, CAT 2005 (pp. 125–134). Kluwer Academic Publishers. https://doi.org/10.1007/1-4020-5438-6_14
Mendeley helps you to discover research relevant for your work.