Optimization of Microwave Vacuum Drying and Pretreatment Methods for Polygonum cuspidatum

Abstract

This study was conducted to optimize the drying process of Polygonum cuspidatum slices using an orthogonal experimental design. The combined effects of pretreatment methods, vacuum pressure and temperature of inner material, drying kinetics, color value, and retention of the indicator compounds were investigated. Seven mathematical models on thin-layer drying were used to study and analyze the drying kinetics. Pretreatment method with blanching for 30 s at 100°C increased the intensity of the red color of P. cuspidatum slices compared with other pretreatment methods and fresh P. cuspidatum slices. P. cuspidatum slices dried at 60°C retained more indicator compounds. Furthermore, microwave pretreatment methods, followed by microwave vacuum for 200 mbar at 50°C, resulted in high concentration of indicator compounds, with short drying time and less energy. This optimized condition for microwave vacuum drying and pretreatment methods would be useful for processing P. cuspidatum. The Newton, Page, and Wang and Singh models slightly fitted the microwave vacuum drying system. The logarithmic, Henderson and Pabis, two-term, and Midilli et al. models can be used to scale up the microwave vacuum drying system to a commercial scale. The two-term and Midilli et al. models were the best fitting mathematical models for the no-pretreatment case at 600 mbar and 60°C.