Low cost UV sensor using ZnO nanorods on ITO electrodes

5Citations
Citations of this article
6Readers
Mendeley users who have this article in their library.
Get full text

Abstract

Ultraviolet (UV) sensors have gained a lot of importance in the field of environmental sciences, due to their pollution monitoring applications. The current limitations of theUVsensors are their higher temperature operability resulting in high power consumption, degradation and low efficiency. Hence an attempt was made to fabricate room temperature (RT) operable,UVindex sensors, using ZnO nanorods on Indium Tin Oxide (ITO) electrodes. The nano rods were grown using hydrothermal method with an optimized concentration and growth duration of 5mMand 3 h respectively. The vertical rods with a hexagonal face, showed an aspect ratio of six, with weak quantum confinement and a strain of the order of ∼0.002. Nanorods were polycrystalline with an average crystallite size of 50 nm. The broad emission spectra were mostly seen in blue region, with transitions due to singly and doubly ionized zinc interstitials, whose concentration increased with increase in growth duration. The UVresponse in direct sunlight gave a sensitivity of 118, with rise time and fall time of 35 s and 65 s respectively. The experiments not only yielded reproducible results but theUVindex profile for the sensor in response to sunlight, over a full day was in accordance with the profile of the standardWHO sensor. This is of great significance especially from the point of view of ozone depletion, health concerns like skin cancer and environment pollution.

Cite

CITATION STYLE

APA

Nagpal, S., Rahul, S. V., & Bhatnagar, P. K. (2020). Low cost UV sensor using ZnO nanorods on ITO electrodes. Engineering Research Express, 2(2). https://doi.org/10.1088/2631-8695/ab87e7

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free