Germanium-Tin (GeSn) is a CMOS-compatible group-IV material. Its growth, however, is plagued by the tendency of Sn segregation and the generation of defects within the GeSn layer when it is grown on the lattice-mismatched substrate. Thus far, thin GeSn has been reported for use in a direct-band gap for near-mid infrared light source and photodetector. In this communication, we report the growth of high quality single-crystalline GeSn (∼ 1 μm) with low compressive stress (-0.3%) and low defects (3 × 107 /cm2) on Ge buffer on Si substrate. The as-grown GeSn is then fabricated into pedestal waveguide of width 1.25 μm. An estimated propagation loss of 1.81 dB/cm and bending loss of 0.19 dB/ bend are measured at 3.74 μm. In the absence of Ge-O absorption peaks at 820 and 550 cm-1, under optimal fabrication and measurement condition, the proposed GeSn waveguide might possibly support light propagation for wavelength beyond 25 μm.
CITATION STYLE
Goh, S. C. K., Shiau, L. L., Zhang, L., Son, B., Chen, Q., Zhong, J., … Tan, C. S. (2021). Monolithic Germanium-Tin Pedestal Waveguide for Mid-Infrared Applications. IEEE Photonics Journal, 13(2). https://doi.org/10.1109/JPHOT.2021.3059452
Mendeley helps you to discover research relevant for your work.