Strengths, microstructure and nanomechanical properties of concrete containing high volume of zeolite powder

Abstract

In order to save resources and reduce the carbon footprint of concrete, the addition of high volumes of supplementary cementitious materials (SCMs) to replace cement is one of the most effective and promising methods. Zeolite powder (ZP), with a high specific surface area, exhibits high pozzolanic reactivity in cement-based materials. This paper investigates the effects of ZP addition used to replace cement at the levels of 20%, 40% and 60% on the strength development and microstructure evolution of concrete, and the nanomechanical properties are analyzed using nanoindentation technique. The results show that the replacement of ZP for cement generally has a dilution effect on the concrete, leading to a detrimental effect on the strength development. However, the 20% ZP replacement for cement slightly enhances the 90-day compressive strength. The pore structure analysis shows that the sample with 20% ZP content has a lower total porosity than the control sample. The hydration of ZP goes against the dilution effect and reduces the total porosity of concrete to compact the microstructure. Nanoindentation investigation of the matrix shows that 20% ZP decreases the content of portlandite but increases the content of high density calcium silicate hydrate (C-S-H). This is beneficial for improving the nanomechanical properties of interface transition zone. However, further increases in the content of ZP (40% and 60%) decrease the total volume of C-S-H and increase the porosity to degrade the microstructure.