An efficient approach for simulating seismoacoustic scattering due to an irregular fluid-solid interface in multilayered media

Abstract

The seismoacoustic scattering due to an irregular fluid-solid interface must be considered when we model the seismic wave propagation in oceanic regions or gulf areas. In this paper, an efficient approach will be presented to treat this kind of problem. The approach can be viewed as an extension of the method originally developed for seismogram synthesis in multilayered solid media with irregular interfaces. In this method, we use the traditional boundary element method to discretize the boundary integral equation in each layer; then define the global matrix propagators by the boundary and continuity conditions in such way that they propagate the information of the element displacements and tractions 'downwards' for layers above the source while 'upwards' for layers below the source, finally solve the problem in the source layer. The main idea of the method is to use the global matrix propagators to suppress the tremendous increase in the memory requirement appearing in the traditional boundary element method when modelling wave propagation in multilayered media. As for the fluid-solid interface, the direct application of the above method is difficult since the global matrix propagators in fluid layers are much different from those defined in solid layers. By using the pressure as the variable inside the fluid layer, we can treat the acoustic wave propagation as a Helmoltz problem. The global matrix propagators can then be extended into the same size as those defined for solid layers by using the standard boundary conditions at the fluid-solid interface (i.e. normal traction continuity, zero tangential traction and normal displacement continuity). By the extended global matrix propagators we can thus propagate the information of the acoustic wave into the elastic wavefield and further obtain the results of the elastic wave propagation in arbitrary solid layers. To demonstrate the validity and feasibility of our method, we should compare our numerical results with the existing solutions. For problems of irregularly layered structures, however, we do not have exact (analytic) solutions. Therefore, it is important to compare the results calculated by completely different numerical methods to ensure validity. For such purpose, we calculate the cases of a plane P wave vertically incident onto two basin-like fluid-solid structures and an SV wave source located below a basin-like fluid-solid interface, of which the synthetic seismograms are accessible from the existing publications. Our results show almost complete agreement with those calculated by the reflection/transmission matrix method and those calculated by the discrete wavenumber method. Second, we calculate the synthetic time domain waveforms for a model with and without a basin-like fluid layer. Comparison observation clearly shows the effects of the fluid layer on the seismic ground motion at land in which seismologists or geophysicists may be of great and practical interests. Furthermore, we take into account the case when an explosive source is located in a fluid layer and illustrate that the method can simulate the water reverberation in the sea. That makes significant sense to deep ocean acoustic experiments. © 2012 The Authors Geophysical Journal International © 2012 RAS.